VTP-40-NE Cable Placer Non-Insulated we have these units IN-STOCK and ready for delivery. Please call today to get your quote.
• Working height: 40 ft (12.2 M)
• Horizontal reach: 29 ft 7 in (9.0 M)
• Full pressure hydraulic single stick controls.
• Platform 32 in x 32 in
• Platform capacity: 500 lbs (226 kg)
• 2019 Ford F-750 4x2 cab and chassis.
• 25,999 lb. GVWR.
• 84” cab to axle.
• 6.7L Power Stroke V8 (270 HP) Turbo diesel engine
• Ford TorqShift HD 6-Speed automatic transmission
• Single channel – straight “C” 14.18 SM, 120,000 PSI frame
• 6.50 limited slip axle.
• Hydraulic brake system – Bosch HydroMax
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
For all your equipment needs we have new, used and reel trailers available for sale or rent. Units in-stock and ready for delivery. Call for you pricing today!
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
Versalift SST 37I mounted on a Ford 7.3L diesel 4x4
UTE certified Versalift insulated SST 37 aerial device with 42ft of working height and 39ft of side reach and 300lbs of bucket capacity. This unit is mounted on a 2002 Ford with a 7.3 liter diesel engine!
• 7.3L Diesel engine
• Automatic transmission
• 17,500 GVWR
• 40-gallon fuel tank
• AM/FM stereo radio
• Painted Yellow
• Approximately 205,000 original miles
• Fresh DOT Inspection, service and repairs
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
2006 Hiranger 5TC-55 on Ford F750
• Hiranger 5TC-55 Serial #2010617110
• Working Height of 60’
• Horizontal Side Reach of 38’ 7” (at over 40’ Elevation)
• Insulated Upper Boom with Lower Boom Insert ANSI Category B
• 90 degree Platform Rotator
• Four (4) Outriggers with Remote Outrigger Controls at Rear of Body
• Chassis engine start/stop at basket
• Hydraulic tool outlets at basket
• Two Speed Throttle
• Emergency Power
• One (1), 24” X 48” Basket With --#600 Capacity
• Hydraulic Bucket Dump
• Hydraulic Winch and Jib with Hydraulic Adjustment (1500# Capacity)
• Dielectric Test and Inspection—Comes with complete report.
• 2006 Ford F750 Serial #3FRXF75T76V359180
• 33,000 # GVWR with 12,000 FAWR and 21,000RAWR
• 194” Wheelbase with 120” CA Dimension
• Allison 6 Speed Automatic Transmission
• Air Brake System with Automatic Moisture Expulsion and Dryer
• CAT C7 Diesel Engine (New Reman in Oct 2015 @ 65,000 miles)
• Approx 70,700 Miles on Odometer
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
2021 INTERNATIONAL CV 515 4x4 Electric Crane Work Truck
• Liftmoore 6036X-20 WP Electric Crane
• 36,000 ft-lbs moment rating
• 6,000 Max Capacity
• 10' - 16' full power extention / manual 16' - 20'
• Wireless proportional control with on-board WiFi diagnostics
• Winch- Planetary gear set with permanent magnet motor
• 90' of 5/16" galvanized aircraft cable
• LED boom tip lights
• Chassis stability monitoring system
• DUTEC DSD 84 Crane Body
• Window guard with exterior LED swivel work lights and cargo lights
• Interior compartment LED strip lights
• VMAC gas 30 CFM air compressor
• Outriggers- manual out and crank down
• 2021 INTERNATIONAL CV 515 4X4 Truck
• 84" C/A 4x4
• 22,500 GVWR
• 6.6L International 350HP Turbo Diesel
• Allison 2700 RDS Auto Transmission
• 225/70R19.5 Alcoa Aluminum wheels & Continental Tires
• 40 Gallon fuel tank
Brand New 4wd electric crane work truck IN STOCK!
Very well-appointed spec, only (1) 6036X available at this time.
SPECIAL FINANCING AVAILABLE
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
2021 RAM 3500 4x4 Liftmoore 3612X Electric Crane Work Truck
• Liftmoore 3612X 9-15 WP Electric Crane
• 12,000 ft-lbs moment rating
• 3,600 Max Capacity
• Full power extention 9'-15'
• Wireless proportional control with on-board WiFi diagnostics
• Winch- Planetary gear set with permanent magnet motor
• 62' of 1/4" galvanized aircraft cable
• LED boom tip lights
• Chassis stability monitoring system
• Liftmoore TM4 108 Crane Body
• Window guard with exterior LED swivel work lights and cargo lights
• Interior compartment LED strip lights
• VMAC gas 30 CFM air compressor
• Outriggers- manual out and crank down
• 2021 RAM 3500 4x4
• Tradesman crew cab 60" CA, 4wd
• 14,000 GVWR
• 6.7L I6 Cummins Turbo Diesel
• 6-spd Auto Transmission
• 4.10 axle ration
• Dual fuel tanks 52/22 gal
Brand New electric crane work truck IN STOCK!
Very well-appointed spec, only (1) 3612 available at this time.
SPECIAL FINANCING AVAILABLE
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
2008 International 4300 Durastar | Versalift VST5000 Aerial
• Versalift VST5000 - Serial #GG080036
• Working Height of 55’
• Horizontal Side Reach of 36' 8"
• Insulated Upper Boom with Lower Boom Insert ANSI Category C 46KV
• 90 degree Platform Rotator
• Four (4) Outriggers with Remote Outrigger Controls at Rear
• Chassis engine start/stop at basket
• Hydraulic tool outlets at basket
• Two Speed Throttle
• Emergency Power
• One (1), 24” X 48” Basket With --#600 Capacity
• Hydraulic Bucket Dump
• Hydraulic Winch and Jib with Hydraulic Adjustment (1000# Capacity)
• Dielectric Test and Inspection—Comes with complete report
• 2008 International 4300 Durastar VIN# 1HTMMAAN39HO70227
• 32,000 # GVWR with 12,000 FAWR and 20,000RAWR
• 194” Wheelbase with 120” CA Dimension
• 5-Speed Manual Transmission with Low gear
• Air Brake System with Automatic Moisture Expulsion and Dryer
• International Diesel Engine
• Approx 121,222 Miles on Odometer
Very clean unit with Brand FX fiberglass body and Aluminum floor. Equipped with additional aluminum top-mounted toolbox and ladder rack, and material racks in cargo area. Capstan reel on tailshelf. Cone holders on front bumper. Remote control Go-Light spotlight. Safety Strobe system. Heavy Pintle hitch with 7-prong round pin trailer light plug. Unit #3532
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
Van mounted Aerial Lifts for Telecommunication,
Cable TV, & Sign Light & Traffic Industry we have over 30 units in-stock and ready for delivery!
The Versalift Telescoping Van series has the flexibility to be used as a service truck for a variety of industries. The broad set of available options that can be applied to Versalift Telescoping Bucket Trucks ensure that our customers receive the exact tool that their organization and people need to get the job done right the first time.
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.
Versalift TMD Series Digger Derricks
IN-Stock and Available for immediate delivery. Several to choose from please call for quote.
• Mounted on Internationl and/or Freightliner chassis 4x4 and 4x2 chassis available
At UTE, our commitment to you is to deliver the highest quality, safest and most reliable telescoping bucket trucks available on the market today.

Utility Truck Equipment has a long history of building and servicing utility equipment. Our management and maintenance personnel are very selective at what we acquire for resale. Most of our used inventory comes to us as a trade in for new trucks we sell to our clients. These trade in trucks are in turn usually quality bucket trucks originally built in our shop.
Our experienced mechanics are the best at inspecting and ensuring that an aerial device is safe and reliable to use. A step by step process ensures that problems are identified and repaired before the sale takes place, including inspecting the truck chassis for any issues that need to be corrected.
After repairs are done, there is a complete audit trail of annual inspection documents along with any available maintenance files. We then stock the truck with all required FMVS and ANSI safety equipment and provide you with expert operational instruction to make it truly "work ready".